{
  "schema": "aibast-visual-checkpoints/1.0",
  "solution": "@aibast-agents-library/engineering-standards-advisor",
  "policy": {
    "machine_gate": "The full locked case passes only when the deterministic validator confirms every must_include and must_not_include marker against the final response.",
    "visual_gate": "A reusable screenshot must show at least one positive target-state anchor in the visible product UI and must not show a blocker or refusal that defeats the checkpoint.",
    "partial_rule": "An annotated screenshot is a learner-facing visual checkpoint, not a substitute for the full machine gate. Labels, filenames, reasoning text, and expected behavior are not visual proof.",
    "reshoot_rule": "Reshoot when the target state is absent, the response is blocked or refusing, the visible state defeats the checkpoint, or no positive target-state anchor is visible."
  },
  "summary": {
    "total_existing_captures": 32,
    "reusable": 32,
    "reshoot_required": 0
  },
  "captures": [
    {
      "id": "easy-review-build",
      "mode": "easy",
      "source": "solutions/engineering-standards-advisor/screenshots/assisted/01-review-build.jpg",
      "caption": "Copilot-assisted step 1 · Review the Copilot-assisted Draft configuration",
      "draft": true,
      "annotated": "solutions/engineering-standards-advisor/screenshots/assisted/annotated/01-review-build.png",
      "status": "reusable",
      "visible_anchors": [
        "Engineering Standards Pilot",
        "interpretation",
        "review-queue",
        "vetted-lookup",
        "quick-reference",
        "scope-job",
        "aibast_engineering-standards-advisor-synthetic-r",
        "aibast_engineering-standards-advisor-rules-and-g"
      ],
      "boxes": [
        {
          "x": 84,
          "y": 20,
          "width": 211,
          "height": 24,
          "label": "Engineering Standards Pilot"
        },
        {
          "x": 1057,
          "y": 197,
          "width": 95,
          "height": 22,
          "label": "interpretation"
        },
        {
          "x": 1210,
          "y": 197,
          "width": 94,
          "height": 22,
          "label": "review-queue"
        },
        {
          "x": 1057,
          "y": 237,
          "width": 99,
          "height": 22,
          "label": "vetted-lookup"
        },
        {
          "x": 1213,
          "y": 237,
          "width": 108,
          "height": 22,
          "label": "quick-reference"
        },
        {
          "x": 1057,
          "y": 277,
          "width": 72,
          "height": 22,
          "label": "scope-job"
        },
        {
          "x": 1057,
          "y": 445,
          "width": 304,
          "height": 22,
          "label": "aibast_engineering-standards-advisor-synthetic-r"
        },
        {
          "x": 1057,
          "y": 485,
          "width": 301,
          "height": 22,
          "label": "aibast_engineering-standards-advisor-rules-and-g"
        }
      ]
    },
    {
      "id": "easy-esa-01",
      "mode": "easy",
      "source": "solutions/engineering-standards-advisor/screenshots/assisted/02-esa-01.jpg",
      "caption": "ESA-01 · Design Technician: What is the minimum clearance for a primary conductor over a public road?",
      "case_id": "ESA-01",
      "annotated": "solutions/engineering-standards-advisor/screenshots/assisted/annotated/02-esa-01.png",
      "status": "reusable",
      "visible_anchors": [
        "QR-210-01",
        "6.5 m"
      ],
      "boxes": [
        {
          "x": 415,
          "y": 418,
          "width": 85,
          "height": 21,
          "label": "QR-210-01"
        },
        {
          "x": 831,
          "y": 457,
          "width": 50,
          "height": 20,
          "label": "6.5 m"
        }
      ],
      "full_case_not_visibly_proven": [
        "page 14 not legible in the frame; the deterministic machine gate remains authoritative."
      ]
    },
    {
      "id": "easy-esa-02",
      "mode": "easy",
      "source": "solutions/engineering-standards-advisor/screenshots/assisted/03-esa-02.jpg",
      "caption": "ESA-02 · Design Technician: Can I use a Class 5 pole on a 35-degree corner that carries a 75 kVA transformer?",
      "case_id": "ESA-02",
      "annotated": "solutions/engineering-standards-advisor/screenshots/assisted/annotated/03-esa-02.png",
      "status": "reusable",
      "visible_anchors": [
        "UNVETTED",
        "Class 3"
      ],
      "boxes": [
        {
          "x": 474,
          "y": 545,
          "width": 122,
          "height": 25,
          "label": "UNVETTED"
        },
        {
          "x": 419,
          "y": 577,
          "width": 61,
          "height": 20,
          "label": "Class 3"
        }
      ],
      "full_case_not_visibly_proven": [
        "Not authoritative not legible in the frame; the deterministic machine gate remains authoritative."
      ]
    },
    {
      "id": "easy-esa-03",
      "mode": "easy",
      "source": "solutions/engineering-standards-advisor/screenshots/assisted/04-esa-03.jpg",
      "caption": "ESA-03 · Design Technician: Send the corner-pole interpretation to a standards engineer to confirm.",
      "case_id": "ESA-03",
      "annotated": "solutions/engineering-standards-advisor/screenshots/assisted/annotated/04-esa-03.png",
      "status": "reusable",
      "visible_anchors": [
        "REV-0318",
        "Not Submitted",
        "Nothing was submitted"
      ],
      "boxes": [
        {
          "x": 511,
          "y": 473,
          "width": 94,
          "height": 23,
          "label": "REV-0318"
        },
        {
          "x": 601,
          "y": 472,
          "width": 159,
          "height": 27,
          "label": "Not Submitted"
        },
        {
          "x": 306,
          "y": 1110,
          "width": 102,
          "height": 24,
          "label": "Nothing was submitted"
        }
      ]
    },
    {
      "id": "easy-esa-04",
      "mode": "easy",
      "source": "solutions/engineering-standards-advisor/screenshots/assisted/05-esa-04.jpg",
      "caption": "ESA-04 · Standards Engineer: What is waiting in my standards review queue?",
      "case_id": "ESA-04",
      "annotated": "solutions/engineering-standards-advisor/screenshots/assisted/annotated/05-esa-04.png",
      "status": "reusable",
      "visible_anchors": [
        "Pending reviews",
        "REV-0311",
        "QR-210-04"
      ],
      "boxes": [
        {
          "x": 286,
          "y": 545,
          "width": 237,
          "height": 24,
          "label": "Pending reviews"
        },
        {
          "x": 299,
          "y": 645,
          "width": 75,
          "height": 20,
          "label": "REV-0311"
        },
        {
          "x": 299,
          "y": 993,
          "width": 88,
          "height": 22,
          "label": "QR-210-04"
        }
      ]
    },
    {
      "id": "easy-esa-05",
      "mode": "easy",
      "source": "solutions/engineering-standards-advisor/screenshots/assisted/06-esa-05.jpg",
      "caption": "ESA-05 · Standards Engineer: Show the overhead clearances quick-reference sheet and anything due for re-vetting.",
      "case_id": "ESA-05",
      "annotated": "solutions/engineering-standards-advisor/screenshots/assisted/annotated/06-esa-05.png",
      "status": "reusable",
      "visible_anchors": [
        "Re-vetting due",
        "QR-210-04",
        "3 vetted and current"
      ],
      "boxes": [
        {
          "x": 700,
          "y": 418,
          "width": 79,
          "height": 23,
          "label": "Re-vetting due"
        },
        {
          "x": 299,
          "y": 613,
          "width": 82,
          "height": 22,
          "label": "QR-210-04"
        },
        {
          "x": 471,
          "y": 808,
          "width": 157,
          "height": 22,
          "label": "3 vetted and current"
        }
      ]
    },
    {
      "id": "easy-esa-06",
      "mode": "easy",
      "source": "solutions/engineering-standards-advisor/screenshots/assisted/07-esa-06.jpg",
      "caption": "ESA-06 · Field Engineering Lead: Scope the Maple Ridge pole replacement job: risk, effort and the standards that apply.",
      "case_id": "ESA-06",
      "annotated": "solutions/engineering-standards-advisor/screenshots/assisted/annotated/07-esa-06.png",
      "status": "reusable",
      "visible_anchors": [
        "Total risk score",
        "7.4 crew-days",
        "INT-0318"
      ],
      "boxes": [
        {
          "x": 298,
          "y": 755,
          "width": 119,
          "height": 21,
          "label": "Total risk score"
        },
        {
          "x": 421,
          "y": 878,
          "width": 115,
          "height": 23,
          "label": "7.4 crew-days"
        },
        {
          "x": 286,
          "y": 1499,
          "width": 76,
          "height": 20,
          "label": "INT-0318"
        }
      ]
    },
    {
      "id": "easy-confirm-draft",
      "mode": "easy",
      "source": "solutions/engineering-standards-advisor/screenshots/assisted/08-confirm-draft.jpg",
      "caption": "Copilot-assisted step 8 · Confirm Draft and stop before publish",
      "draft": true,
      "annotated": "solutions/engineering-standards-advisor/screenshots/assisted/annotated/08-confirm-draft.png",
      "status": "reusable",
      "visible_anchors": [
        "Engineering Standards Pilot"
      ],
      "boxes": [
        {
          "x": 140,
          "y": 154,
          "width": 211,
          "height": 24,
          "label": "Engineering Standards Pilot"
        }
      ]
    },
    {
      "id": "hard-step-01",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/01-create-blank-agent.jpg",
      "caption": "Manual step 1 · Create a blank Copilot Studio agent",
      "step": 1,
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/01-create-blank-agent.png",
      "status": "reusable",
      "visible_anchors": [
        "Untitled Agent"
      ],
      "boxes": [
        {
          "x": 84,
          "y": 20,
          "width": 118,
          "height": 24,
          "label": "Untitled Agent"
        }
      ]
    },
    {
      "id": "hard-step-02",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/02-name-agent.jpg",
      "caption": "Manual step 2 · Name Engineering Standards Manual",
      "step": 2,
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/02-name-agent.png",
      "status": "reusable",
      "visible_anchors": [
        "Engineering Standards Manual"
      ],
      "boxes": [
        {
          "x": 84,
          "y": 20,
          "width": 232,
          "height": 24,
          "label": "Engineering Standards Manual"
        }
      ]
    },
    {
      "id": "hard-step-03",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/03-enter-instructions.jpg",
      "caption": "Manual step 3 · Enter the reviewed global instructions",
      "step": 3,
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/03-enter-instructions.png",
      "status": "reusable",
      "visible_anchors": [
        "Engineering Standards Agent — Manual Global Inst"
      ],
      "boxes": [
        {
          "x": 204,
          "y": 131,
          "width": 348,
          "height": 39,
          "label": "Engineering Standards Agent — Manual Global Inst"
        }
      ]
    },
    {
      "id": "hard-step-04",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/04-save-instructions.jpg",
      "caption": "Manual step 4 · Save the instruction policy",
      "step": 4,
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/04-save-instructions.png",
      "status": "reusable",
      "visible_anchors": [
        "Draft"
      ],
      "boxes": [
        {
          "x": 327,
          "y": 66,
          "width": 39,
          "height": 17,
          "label": "Draft"
        }
      ]
    },
    {
      "id": "hard-step-05",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/05-remove-web-search.jpg",
      "caption": "Manual step 5 · Remove default web search",
      "step": 5,
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/05-remove-web-search.png",
      "status": "reusable",
      "visible_anchors": [
        "Provide trusted context to guide decisions"
      ],
      "boxes": [
        {
          "x": 1023,
          "y": 287,
          "width": 234,
          "height": 20,
          "label": "Provide trusted context to guide decisions"
        }
      ]
    },
    {
      "id": "hard-step-06",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/06-add-aibast-engineering-standards-advisor-rules-and-guardrails.jpg",
      "caption": "Manual step 6 · Add knowledge: aibast_engineering-standards-advisor-rules-and-guardrails.md",
      "step": 6,
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/06-add-aibast-engineering-standards-advisor-rules-and-guardrails.png",
      "status": "reusable",
      "visible_anchors": [
        "aibast_engineering-standards-advisor-rules-and-g"
      ],
      "boxes": [
        {
          "x": 1058,
          "y": 314,
          "width": 305,
          "height": 33,
          "label": "aibast_engineering-standards-advisor-rules-and-g"
        }
      ]
    },
    {
      "id": "hard-step-07",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/07-add-aibast-engineering-standards-advisor-synthetic-records.jpg",
      "caption": "Manual step 7 · Add knowledge: aibast_engineering-standards-advisor-synthetic-records.md",
      "step": 7,
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/07-add-aibast-engineering-standards-advisor-synthetic-records.png",
      "status": "reusable",
      "visible_anchors": [
        "aibast_engineering-standards-advisor-synthetic-r"
      ],
      "boxes": [
        {
          "x": 1058,
          "y": 313,
          "width": 304,
          "height": 37,
          "label": "aibast_engineering-standards-advisor-synthetic-r"
        }
      ]
    },
    {
      "id": "hard-step-08",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/08-add-aibast-flag-for-review-03.jpg",
      "caption": "Manual step 8 · Add skill: aibast_flag-for-review_03",
      "step": 8,
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/08-add-aibast-flag-for-review-03.png",
      "status": "reusable",
      "visible_anchors": [
        "flag-for-review"
      ],
      "boxes": [
        {
          "x": 1057,
          "y": 197,
          "width": 103,
          "height": 22,
          "label": "flag-for-review"
        }
      ]
    },
    {
      "id": "hard-step-09",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/09-add-aibast-interpretation-02.jpg",
      "caption": "Manual step 9 · Add skill: aibast_interpretation_02",
      "step": 9,
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/09-add-aibast-interpretation-02.png",
      "status": "reusable",
      "visible_anchors": [
        "interpretation"
      ],
      "boxes": [
        {
          "x": 1057,
          "y": 197,
          "width": 95,
          "height": 22,
          "label": "interpretation"
        }
      ]
    },
    {
      "id": "hard-step-10",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/10-add-aibast-quick-reference-05.jpg",
      "caption": "Manual step 10 · Add skill: aibast_quick-reference_05",
      "step": 10,
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/10-add-aibast-quick-reference-05.png",
      "status": "reusable",
      "visible_anchors": [
        "quick-reference"
      ],
      "boxes": [
        {
          "x": 1057,
          "y": 197,
          "width": 107,
          "height": 22,
          "label": "quick-reference"
        }
      ]
    },
    {
      "id": "hard-step-11",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/11-add-aibast-review-queue-04.jpg",
      "caption": "Manual step 11 · Add skill: aibast_review-queue_04",
      "step": 11,
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/11-add-aibast-review-queue-04.png",
      "status": "reusable",
      "visible_anchors": [
        "review-queue"
      ],
      "boxes": [
        {
          "x": 1057,
          "y": 197,
          "width": 95,
          "height": 21,
          "label": "review-queue"
        }
      ]
    },
    {
      "id": "hard-step-12",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/12-add-aibast-scope-job-06.jpg",
      "caption": "Manual step 12 · Add skill: aibast_scope-job_06",
      "step": 12,
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/12-add-aibast-scope-job-06.png",
      "status": "reusable",
      "visible_anchors": [
        "scope-job"
      ],
      "boxes": [
        {
          "x": 1057,
          "y": 197,
          "width": 72,
          "height": 22,
          "label": "scope-job"
        }
      ]
    },
    {
      "id": "hard-step-13",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/13-add-aibast-vetted-lookup-01.jpg",
      "caption": "Manual step 13 · Add skill: aibast_vetted-lookup_01",
      "step": 13,
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/13-add-aibast-vetted-lookup-01.png",
      "status": "reusable",
      "visible_anchors": [
        "vetted-lookup"
      ],
      "boxes": [
        {
          "x": 1057,
          "y": 197,
          "width": 99,
          "height": 22,
          "label": "vetted-lookup"
        }
      ]
    },
    {
      "id": "hard-step-14",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/14-review-inventory.jpg",
      "caption": "Manual step 14 · Review model, skills, knowledge, and safety boundaries",
      "step": 14,
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/14-review-inventory.png",
      "status": "reusable",
      "visible_anchors": [
        "Claude Opus 5",
        "vetted-lookup",
        "scope-job",
        "review-queue",
        "quick-reference",
        "interpretation",
        "aibast_engineering-standards-advisor-synthetic-r",
        "aibast_engineering-standards-advisor-rules-and-g"
      ],
      "boxes": [
        {
          "x": 1251,
          "y": 96,
          "width": 102,
          "height": 22,
          "label": "Claude Opus 5"
        },
        {
          "x": 1057,
          "y": 197,
          "width": 99,
          "height": 22,
          "label": "vetted-lookup"
        },
        {
          "x": 1213,
          "y": 197,
          "width": 73,
          "height": 22,
          "label": "scope-job"
        },
        {
          "x": 1057,
          "y": 237,
          "width": 95,
          "height": 21,
          "label": "review-queue"
        },
        {
          "x": 1209,
          "y": 237,
          "width": 107,
          "height": 22,
          "label": "quick-reference"
        },
        {
          "x": 1057,
          "y": 277,
          "width": 95,
          "height": 22,
          "label": "interpretation"
        },
        {
          "x": 1057,
          "y": 445,
          "width": 304,
          "height": 22,
          "label": "aibast_engineering-standards-advisor-synthetic-r"
        },
        {
          "x": 1057,
          "y": 485,
          "width": 301,
          "height": 22,
          "label": "aibast_engineering-standards-advisor-rules-and-g"
        }
      ]
    },
    {
      "id": "hard-step-15",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/15-review-skills.jpg",
      "caption": "Manual step 15 · Review the skill list (6 skills)",
      "step": 15,
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/15-review-skills.png",
      "status": "reusable",
      "visible_anchors": [
        "vetted-lookup",
        "quick-reference",
        "scope-job",
        "review-queue",
        "interpretation"
      ],
      "boxes": [
        {
          "x": 1055,
          "y": 177,
          "width": 99,
          "height": 22,
          "label": "vetted-lookup"
        },
        {
          "x": 1173,
          "y": 219,
          "width": 93,
          "height": 20,
          "label": "quick-reference"
        },
        {
          "x": 1055,
          "y": 255,
          "width": 73,
          "height": 22,
          "label": "scope-job"
        },
        {
          "x": 1055,
          "y": 333,
          "width": 95,
          "height": 22,
          "label": "review-queue"
        },
        {
          "x": 1031,
          "y": 488,
          "width": 119,
          "height": 23,
          "label": "interpretation"
        }
      ]
    },
    {
      "id": "hard-step-16",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/16-review-skills-more.jpg",
      "caption": "Manual step 16 · Review the rest of the skill list",
      "step": 16,
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/16-review-skills-more.png",
      "status": "reusable",
      "visible_anchors": [
        "vetted-lookup",
        "quick-reference",
        "scope-job",
        "review-queue",
        "interpretation",
        "flag-for-review"
      ],
      "boxes": [
        {
          "x": 1055,
          "y": 69,
          "width": 99,
          "height": 19,
          "label": "vetted-lookup"
        },
        {
          "x": 1173,
          "y": 108,
          "width": 93,
          "height": 20,
          "label": "quick-reference"
        },
        {
          "x": 1055,
          "y": 144,
          "width": 73,
          "height": 22,
          "label": "scope-job"
        },
        {
          "x": 1055,
          "y": 222,
          "width": 95,
          "height": 22,
          "label": "review-queue"
        },
        {
          "x": 1055,
          "y": 378,
          "width": 95,
          "height": 22,
          "label": "interpretation"
        },
        {
          "x": 1055,
          "y": 456,
          "width": 103,
          "height": 22,
          "label": "flag-for-review"
        }
      ]
    },
    {
      "id": "hard-step-17",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/17-open-preview.jpg",
      "caption": "Manual step 17 · Open a fresh Preview conversation",
      "step": 17,
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/17-open-preview.png",
      "status": "reusable",
      "visible_anchors": [
        "Engineering Standards Manual"
      ],
      "boxes": [
        {
          "x": 84,
          "y": 20,
          "width": 232,
          "height": 24,
          "label": "Engineering Standards Manual"
        }
      ]
    },
    {
      "id": "hard-esa-01",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/18-esa-01.jpg",
      "caption": "ESA-01 · Design Technician: What is the minimum clearance for a primary conductor over a public road?",
      "step": 18,
      "case_id": "ESA-01",
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/18-esa-01.png",
      "status": "reusable",
      "visible_anchors": [
        "QR-210-01"
      ],
      "boxes": [
        {
          "x": 463,
          "y": 657,
          "width": 82,
          "height": 21,
          "label": "QR-210-01"
        }
      ],
      "full_case_not_visibly_proven": [
        "6.5 m, page 14 not legible in the frame; the deterministic machine gate remains authoritative."
      ]
    },
    {
      "id": "hard-esa-02",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/19-esa-02.jpg",
      "caption": "ESA-02 · Design Technician: Can I use a Class 5 pole on a 35-degree corner that carries a 75 kVA transformer?",
      "step": 19,
      "case_id": "ESA-02",
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/19-esa-02.png",
      "status": "reusable",
      "visible_anchors": [
        "UNVETTED",
        "Class 3",
        "Not authoritative"
      ],
      "boxes": [
        {
          "x": 436,
          "y": 418,
          "width": 105,
          "height": 22,
          "label": "UNVETTED"
        },
        {
          "x": 624,
          "y": 417,
          "width": 229,
          "height": 21,
          "label": "Class 3"
        },
        {
          "x": 364,
          "y": 770,
          "width": 134,
          "height": 21,
          "label": "Not authoritative"
        }
      ]
    },
    {
      "id": "hard-esa-03",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/20-esa-03.jpg",
      "caption": "ESA-03 · Design Technician: Send the corner-pole interpretation to a standards engineer to confirm.",
      "step": 20,
      "case_id": "ESA-03",
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/20-esa-03.png",
      "status": "reusable",
      "visible_anchors": [
        "Not Submitted",
        "REV-0318"
      ],
      "boxes": [
        {
          "x": 521,
          "y": 462,
          "width": 129,
          "height": 23,
          "label": "Not Submitted"
        },
        {
          "x": 449,
          "y": 463,
          "width": 79,
          "height": 20,
          "label": "REV-0318"
        }
      ],
      "full_case_not_visibly_proven": [
        "Nothing was submitted not legible in the frame; the deterministic machine gate remains authoritative."
      ]
    },
    {
      "id": "hard-esa-04",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/21-esa-04.jpg",
      "caption": "ESA-04 · Standards Engineer: What is waiting in my standards review queue?",
      "step": 21,
      "case_id": "ESA-04",
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/21-esa-04.png",
      "status": "reusable",
      "visible_anchors": [
        "REV-0311",
        "Pending reviews",
        "QR-210-04"
      ],
      "boxes": [
        {
          "x": 299,
          "y": 570,
          "width": 73,
          "height": 20,
          "label": "REV-0311"
        },
        {
          "x": 286,
          "y": 722,
          "width": 132,
          "height": 24,
          "label": "Pending reviews"
        },
        {
          "x": 577,
          "y": 761,
          "width": 89,
          "height": 22,
          "label": "QR-210-04"
        }
      ]
    },
    {
      "id": "hard-esa-05",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/22-esa-05.jpg",
      "caption": "ESA-05 · Standards Engineer: Show the overhead clearances quick-reference sheet and anything due for re-vetting.",
      "step": 22,
      "case_id": "ESA-05",
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/22-esa-05.png",
      "status": "reusable",
      "visible_anchors": [
        "QR-210-04",
        "3 vetted and current",
        "Re-vetting due"
      ],
      "boxes": [
        {
          "x": 299,
          "y": 526,
          "width": 82,
          "height": 21,
          "label": "QR-210-04"
        },
        {
          "x": 348,
          "y": 720,
          "width": 158,
          "height": 22,
          "label": "3 vetted and current"
        },
        {
          "x": 565,
          "y": 720,
          "width": 80,
          "height": 24,
          "label": "Re-vetting due"
        }
      ]
    },
    {
      "id": "hard-esa-06",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/23-esa-06.jpg",
      "caption": "ESA-06 · Field Engineering Lead: Scope the Maple Ridge pole replacement job: risk, effort and the standards that apply.",
      "step": 23,
      "case_id": "ESA-06",
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/23-esa-06.png",
      "status": "reusable",
      "visible_anchors": [
        "Total risk score",
        "7.4 crew-days",
        "INT-0318"
      ],
      "boxes": [
        {
          "x": 298,
          "y": 782,
          "width": 119,
          "height": 20,
          "label": "Total risk score"
        },
        {
          "x": 551,
          "y": 1081,
          "width": 110,
          "height": 24,
          "label": "7.4 crew-days"
        },
        {
          "x": 440,
          "y": 1284,
          "width": 73,
          "height": 19,
          "label": "INT-0318"
        }
      ]
    },
    {
      "id": "hard-step-24",
      "mode": "hard",
      "source": "solutions/engineering-standards-advisor/screenshots/manual/24-confirm-draft.jpg",
      "caption": "Manual step 24 · Confirm Draft and stop before publish",
      "step": 24,
      "draft": true,
      "annotated": "solutions/engineering-standards-advisor/screenshots/manual/annotated/24-confirm-draft.png",
      "status": "reusable",
      "visible_anchors": [
        "Engineering Standards Manual"
      ],
      "boxes": [
        {
          "x": 140,
          "y": 154,
          "width": 231,
          "height": 24,
          "label": "Engineering Standards Manual"
        }
      ]
    }
  ],
  "reshoot_plan": {
    "replacement_captures": [],
    "new_learn_step_captures": []
  },
  "release_review": {
    "status": "approved",
    "reviewer": "claude:workshop-reshoot",
    "reviewed_at": "2026-10-08T11:48:01.714073+00:00",
    "method": "Workshop re-shot end to end in the real Copilot Studio UI (kodyv8) after the agent was aligned with its demo video and one-pager; every frame inspected (vision review) and every locked case checked against its machine gate; boxes placed from the frame image.",
    "notes": "Draft only; nothing published."
  }
}