Edit

Native Module Setup

This documentation is a work in progress and version-specific. Please check that the version of this document (top of page) matches the version of RN/RNW you're targeting. Examples (C# and C++/WinRT):

• Native Module Sample in microsoft/react-native-windows-samples
• Sample App in microsoft/react-native-windows/packages/microsoft-reactnative-sampleapps

This guide will help set you up with the Visual Studio infrastructure to author your own stand-alone native module for React Native Windows. In this document we'll be creating the scaffolding for a NativeModuleSample native module.

Development Environment

Make sure you have installed all of the development dependencies.

If you're planning on writing in C++, you must install the C++/WinRT Visual Studio Extension.

Choose your own adventure

Once your development environment has been correctly configured, you have several options about how to access native APIs. You can either:

• Reference the APIs directly from within a React Native for Windows project
• Create a new native module library that can be can be distributed separately from your app
• Add Windows support to an existing community library

Referencing Windows APIs within a React Native for Windows project

If you are only planning on adding a native module to your existing React Native Windows app, i.e.:

1. You followed the Getting Started guide, where
2. You ran npx react-native-windows-init to add Windows to your project, and
3. You are just adding your native code to the app project under the windows folder.

Then you can simply open the Visual Studio solution in the windows folder and add the new files directly to the app project.

Creating a new native module library project

The steps to create a new native module library project are:

1. Follow the official React Native instructions to create a blank native module project
2. Add Windows support to the newly created library

Creating a blank native module project

Follow the official React Native instructions at https://reactnative.dev/docs/native-modules-setup.

npx create-react-native-module --module-name "NativeModuleSample" NativeModuleSample
cd NativeModuleSample
yarn install

Now you'll have a new native module project under NativeModuleSample. Be sure to look at the command output for further steps you'll want to do before publishing the project.

At this point, follow the steps below to add Windows support to the newly created library.

Adding Windows support to an existing library

The steps below are written as if you're working with the NativeModuleSample example above, in the root folder of the project. Substitute the name of the library you're actually working on where appropriate, and ensure that you're working in the appropriate root folder of the library.

Updating your package.json

Many native module libraries (including the default library template) target older versions of react and react-native than Windows supports, so you'll need to upgrade to newer versions in order to add support for react-native-windows.

Properly defining your NPM dependencies is an essential part of creating and maintaining a React Native library, especially one that supports multiple platforms. The instructions here represent the minimum steps required to start targeting react-native-windows. If you're adding Windows support to a library you don't own, you'll need to work with the library owners to make sure any changes made to package.json are appropriate.

For more information on how NPM dependencies work, see Specifying dependencies and devDependencies in a package.json file.

You can use the npm info command to find the correct versions to use. Let's assume you plan on building against the v0.62-stable version of react-native-windows.

Use the following command to find the matching versions of react:

npm info react-native-windows@v0.62-stable devDependencies.react

Take the result of that command (let's say it's 16.11.0) and use it to upgrade the dev dependency:

yarn upgrade react@16.11.0 --dev

You'll need to repeat the steps for react-native, i.e.:

npm info react-native-windows@v0.62-stable devDependencies.react-native

Again, take the result of that command (let's say it's 0.62.2) and use it to upgrade the dev dependency:

yarn upgrade react-native@0.62.2 --dev

Now you should be ready to add react-native-windows.

yarn add react-native-windows@v0.62-stable --dev

Creating the Visual Studio Project / Solution

Now it's time to switch into Visual Studio and create a new project.

These are the version specific manual steps for setting up the native projects and solutions. If you upgrade your module to RN >= 0.64, the react-native-windows-init command can create the correct projects and solutions for you, using the --projectType lib flag.

Open Visual Studio and select Create a new project. You're going to create a new Windows Runtime Component project, which produces a library that is compatible with Windows UWP apps.

If you're planning on writing your native module in C#, you'll want to choose the C# Windows Runtime Component (Universal Windows):

If you're planning on writing your native module in C++, you'll want to choose Windows Runtime Component (C++/WinRT):

Important: You want C++/WinRT, not C++/CX. Do not choose the C++/CX Windows Runtime Component (Universal) project-type:

If you don't see the Windows Runtime Component (C++/WinRT) project type, go back and install the C++/WinRT Visual Studio Extension under Development Environment.

1. Set the Project Name to NativeModuleSample.
2. Set the Location to the native module directory (typically the same directory with the ios and android sub-directories).
3. Set the Solution Name to NativeModuleSample.
4. Click Create.

Next you'll be prompted to select the versions of Windows you'll support. This should match the values for React Native Windows, which as of version 0.62, are:

1. Set the Target version to Windows 10, version 1903 (10.0; Build 18362).
2. Set the Minimum version to Windows 10 Fall Creators Update (10.0; Build 16299).

You should now have a new NativeModuleSample solution file at .\NativeModuleSample\NativeModuleSample.sln and a NativeModuleSample project at .\NativeModuleSample\NativeModuleSample\NativeModuleSample.csproj for C# or .\NativeModuleSample\NativeModuleSample\NativeModuleSample.vcxproj for C++.

Additionally, for C++/WinRT projects, you'll need to change the following:

1. Right click on the project and choose Manage NuGet Packages...
   1. Select version 2.0.200316.3 for Microsoft.Windows.CppWinRT package.
2. Right-click on the project and choose Properties
   1. Under Linker > Windows Metadata set Generate Windows Metadata to Yes.

Now, before we go any further we'll want to rename the root directory of the Windows native code to windows to match the peer android and ios directories:

1. Close the solution with File > Close Solution.
2. Rename that top NativeModuleSample directory windows.
3. Re-open the solution file at windows\NativeModuleSample.sln.

Optional: Whether you're creating a new native module from scratch, or adding windows support to an existing iOS/android module, if you're using git, you'll want to add Visual Studio-specific entries in your project's .gitignore. The simplest way to do this is to get VisualStudio.gitignore and save it as windows\.gitignore.

Now it's time to add React Native Windows into the solution.

Adding React Native Windows to the Visual Studio Solution

We're going to add several React Native Windows projects to your solution. So to avoid confusing them with your own code, we're first going to create a solution folder called ReactNative:

1. Open the Solution Explorer sidebar.
2. Right-click on Solution 'NativeModuleSample' at the top.
3. Select Add > New Solution Folder.
4. Name the folder ReactNative.

Now we're going to add all of the following React Native Windows projects to that ReactNative folder. All of these projects are located under the node_modules\react-native-windows directory in the root of your react-native-my-library project directory.

For more details about what these projects do, see Project Structure.

VS Project	Project File
Common	Common\Common.vcxproj
Folly	Folly\Folly.vcxproj
JSI.Universal	JSI\Universal\JSI.Universal.vcxproj
Microsoft.ReactNative	Microsoft.ReactNative\Microsoft.ReactNative.vcxproj
ReactCommon	ReactCommon\ReactCommon.vcxproj
ReactWindowsCore	ReactWindowsCore\ReactWindowsCore.vcxproj
Chakra	Chakra\Chakra.vcxitems
Include	include\Include.vcxitems
JSI.Shared	JSI\Shared\JSI.Shared.vcxitems
Microsoft.ReactNative.Cxx	Microsoft.ReactNative.Cxx\Microsoft.ReactNative.Cxx.vcxitems
Microsoft.ReactNative.SharedManaged	Microsoft.ReactNative.SharedManaged\Microsoft.ReactNative.SharedManaged.shproj
Mso	Mso\Mso.vcxitems
Shared	Shared\Shared.vcxitems

For each project, you'll do the following:

1. Open the Solution Explorer sidebar.
2. Right-click on the ReactNative folder.
3. Select Add > Existing Project....
4. Select the project file and click Open.

When you are done, your solution should look like this:

You now have all of the React Native Windows projects to your solution. Next we're going to reference them in our NativeModuleSample project.

Referencing React Native Windows in your Project

You'll need to edit your project file manually for this step. Open your project file (windows\NativeModuleSample\NativeModuleSample.vcxproj for C++ or windows\NativeModuleSample\NativeModuleSample.csproj for C#) in a text editor.

Normally, you could manually add references to the correct projects using the Visual Studio UI. However you may be required to update your projects to maintain support for new versions of React Native Windows. The props and target files provided here are to help insulate you from future dependency changes.

C++/WinRT

1. Insert the following

<PropertyGroup Label="ReactNativeWindowsProps">
  <ReactNativeWindowsDir Condition="'$(ReactNativeWindowsDir)' == ''">$([MSBuild]::GetDirectoryNameOfFileAbove($(SolutionDir), 'node_modules\react-native-windows\package.json'))\node_modules\react-native-windows\</ReactNativeWindowsDir>
</PropertyGroup>

here:

<Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+<PropertyGroup Label="ReactNativeWindowsProps">
+  <ReactNativeWindowsDir Condition="'$(ReactNativeWindowsDir)' == ''">$([MSBuild]::GetDirectoryNameOfFileAbove($(SolutionDir), 'node_modules\react-native-windows\package.json'))\node_modules\react-native-windows\</ReactNativeWindowsDir>
+</PropertyGroup>

2. Insert the following

<ImportGroup Label="ReactNativeWindowsPropertySheets">
  <Import Project="$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CppLib.props" Condition="Exists('$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CppLib.props')" />
</ImportGroup>

here:

<ImportGroup Label="PropertySheets">
  <Import Project="PropertySheet.props" />
</ImportGroup>
+<ImportGroup Label="ReactNativeWindowsPropertySheets">
+  <Import Project="$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CppLib.props" Condition="Exists('$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CppLib.props')" />
+</ImportGroup>

3. Insert the following:

<ImportGroup Label="ReactNativeWindowsTargets">
  <Import Project="$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CppLib.targets" Condition="Exists('$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CppLib.targets')" />
</ImportGroup>
<Target Name="EnsureReactNativeWindowsTargets" BeforeTargets="PrepareForBuild">
  <PropertyGroup>
    <ErrorText>This project references targets in your node_modules\react-native-windows folder that are missing. The missing file is {0}.</ErrorText>
  </PropertyGroup>
  <Error Condition="!Exists('$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CppLib.props')" Text="$([System.String]::Format('$(ErrorText)', '$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CppLib.props'))" />
  <Error Condition="!Exists('$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CppLib.targets')" Text="$([System.String]::Format('$(ErrorText)', '$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CppLib.targets'))" />
</Target>

here:

<Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+<ImportGroup Label="ReactNativeWindowsTargets">
+  <Import Project="$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CppLib.targets" Condition="Exists('$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CppLib.targets')" />
+</ImportGroup>
+<Target Name="EnsureReactNativeWindowsTargets" BeforeTargets="PrepareForBuild">
+  <PropertyGroup>
+    <ErrorText>This project references targets in your node_modules\react-native-windows folder that are missing. The missing file is {0}.</ErrorText>
+  </PropertyGroup>
+  <Error Condition="!Exists('$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CppLib.props')" Text="$([System.String]::Format('$(ErrorText)', '$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CppLib.props'))" />
+  <Error Condition="!Exists('$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CppLib.targets')" Text="$([System.String]::Format('$(ErrorText)', '$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CppLib.targets'))" />
+</Target>

Save your changes and reload the project in Visual Studio. You should now see Microsoft.ReactNative in the Solution Explorer under NativeModuleSample > References.

C#

1. Insert the following:

<PropertyGroup Label="ReactNativeWindowsProps">
  <ReactNativeWindowsDir Condition="'$(ReactNativeWindowsDir)' == ''">$([MSBuild]::GetDirectoryNameOfFileAbove($(SolutionDir), 'node_modules\react-native-windows\package.json'))\node_modules\react-native-windows\</ReactNativeWindowsDir>
</PropertyGroup>

here:

<Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
+<PropertyGroup Label="ReactNativeWindowsProps">
+  <ReactNativeWindowsDir Condition="'$(ReactNativeWindowsDir)' == ''">$([MSBuild]::GetDirectoryNameOfFileAbove($(SolutionDir), 'node_modules\react-native-windows\package.json'))\node_modules\react-native-windows\</ReactNativeWindowsDir>
+</PropertyGroup>

2. Insert the following:

<ImportGroup Label="ReactNativeWindowsPropertySheets">
  <Import Project="$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CSharpLib.props" Condition="Exists('$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CSharpLib.props')" />
</ImportGroup>
<ImportGroup Label="ReactNativeWindowsTargets">
  <Import Project="$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CSharpLib.targets" Condition="Exists('$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CSharpLib.targets')" />
</ImportGroup>
<Target Name="EnsureReactNativeWindowsTargets" BeforeTargets="PrepareForBuild">
  <PropertyGroup>
    <ErrorText>This project references targets in your node_modules\react-native-windows folder that are missing. The missing file is {0}.</ErrorText>
  </PropertyGroup>
  <Error Condition="!Exists('$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CSharpLib.props')" Text="$([System.String]::Format('$(ErrorText)', '$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CSharpLib.props'))" />
  <Error Condition="!Exists('$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CSharpLib.targets')" Text="$([System.String]::Format('$(ErrorText)', '$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CSharpLib.targets'))" />
</Target>

here:

<Import Project="$(MSBuildExtensionsPath)\Microsoft\WindowsXaml\v$(VisualStudioVersion)\Microsoft.Windows.UI.Xaml.CSharp.targets" />
+<ImportGroup Label="ReactNativeWindowsPropertySheets">
+  <Import Project="$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CSharpLib.props" Condition="Exists('$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CSharpLib.props')" />
+</ImportGroup>
+<ImportGroup Label="ReactNativeWindowsTargets">
+  <Import Project="$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CSharpLib.targets" Condition="Exists('$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CSharpLib.targets')" />
+</ImportGroup>
+<Target Name="EnsureReactNativeWindowsTargets" BeforeTargets="PrepareForBuild">
+  <PropertyGroup>
+    <ErrorText>This project references targets in your node_modules\react-native-windows folder that are missing. The missing file is {0}.</ErrorText>
+  </PropertyGroup>
+  <Error Condition="!Exists('$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CSharpLib.props')" Text="$([System.String]::Format('$(ErrorText)', '$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CSharpLib.props'))" />
+  <Error Condition="!Exists('$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CSharpLib.targets')" Text="$([System.String]::Format('$(ErrorText)', '$(ReactNativeWindowsDir)\PropertySheets\External\Microsoft.ReactNative.Uwp.CSharpLib.targets'))" />
+</Target>

Save your changes and reload the project in Visual Studio. You should now see Microsoft.ReactNative in the Solution Explorer under NativeModuleSample > References.

Testing your Build

To make sure that everything is working, you'll want to try building NativeModuleSample. First you'll want to make sure you've chosen a supported platform:

1. At the top, change the Solution Platform to x86 or x64.
2. In the Build menu, select Build Solution.

Making your module ready for consumption in an app

If you've followed the steps above, your module should be ready for consumption.

However, there are some things you may need to check:

1. Fixing relative NuGet paths

If you are writing a C++/WinRT module and have added any NuGet package dependencies, you'll see references to those packages in your vcxproj file as relative references e.g. ..\packages\.... We need these to use the solution directory instead, so replace all mentions of ..\packages\ with $(SolutionDir)\.

Example:

-<Import Project="..\packages\NuGetPackage.1.0.0.0\build\native\NuGetPackage.props" Condition="Exists('..\packages\NuGetPackage.1.0.0.0\build\native\NuGetPackage.props')" />
+<Import Project="$(SolutionDir)\packages\NuGetPackage.1.0.0.0\build\native\NuGetPackage.props" Condition="Exists('$(SolutionDir)\packages\NuGetPackage.1.0.0.0\build\native\NuGetPackage.props')" />

Testing the module before it gets published

Option 1: Create a new test app

1. Follow the getting started guide to create a new React Native Windows app.
2. Run npm i <module-local-path> --save (e.g. npm i D:\NativeModuleSample --save) to install the local module.
3. Link the native module.

Option 2: Adding Windows support to existing sample app

If you are working on an existing module that already has iOS and Android samples, and want to add Windows support to the existing test app, follow these steps (example of WebView module test app can be found here).

1. In a different directory, follow the getting started guide and create a new React Native Windows app.
2. Copy the Windows folder from the blank RNW app into the existing sample app's sample app's folder. (The RNW CLI helps create the correct project setup that you can then copy directly into the sample app.)
3. Open sln and vxcproj files and check node_module reference paths. Fix the paths if necessary based on how the folders are structured in native module repo (example).
4. Open the solution with Visual Studio and link native module.

>The project should build correctly at this point, but we still need to setup some special metro configurations for Windows in order to run the app without breaking iOS and Android bundling.

5. Add metro.config.windows for Windows bundling (example).
6. In package.json, add a separate start command for windows and attach a special argument to tell metro to use the windows config we just created (example).
7. Add react-native.config.js to parse the special argument we added (example).
8. Update JS main module path (relative path to metro projectRoot) in App.cpp if necessary (example).

Documenting Your Module

Once your module is complete, update react-native-community/directory so that its information on your native module is up to date. If you are building a native module which will be maintained by Microsoft, please update the Supported Community Modules documentation in [react-native-windows-samples] with your native module's information.