Struct windows::Win32::System::Power::PPM_WMI_PERF_STATES

#[repr(C)]
pub struct PPM_WMI_PERF_STATES {Show 21 fields
    pub Count: u32,
    pub MaxFrequency: u32,
    pub CurrentState: u32,
    pub MaxPerfState: u32,
    pub MinPerfState: u32,
    pub LowestPerfState: u32,
    pub ThermalConstraint: u32,
    pub BusyAdjThreshold: u8,
    pub PolicyType: u8,
    pub Type: u8,
    pub Reserved: u8,
    pub TimerInterval: u32,
    pub TargetProcessors: u64,
    pub PStateHandler: u32,
    pub PStateContext: u32,
    pub TStateHandler: u32,
    pub TStateContext: u32,
    pub FeedbackHandler: u32,
    pub Reserved1: u32,
    pub Reserved2: u64,
    pub State: [PPM_WMI_PERF_STATE; 1],
}

Fields§

§Count: u32§MaxFrequency: u32§CurrentState: u32§MaxPerfState: u32§MinPerfState: u32§LowestPerfState: u32§ThermalConstraint: u32§BusyAdjThreshold: u8§PolicyType: u8§Type: u8§Reserved: u8§TimerInterval: u32§TargetProcessors: u64§PStateHandler: u32§PStateContext: u32§TStateHandler: u32§TStateContext: u32§FeedbackHandler: u32§Reserved1: u32§Reserved2: u64§State: [PPM_WMI_PERF_STATE; 1]

Trait Implementations§

impl Clone for PPM_WMI_PERF_STATES

fn clone(&self) -> PPM_WMI_PERF_STATES

Returns a copy of the value. Read more

1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for PPM_WMI_PERF_STATES

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl Default for PPM_WMI_PERF_STATES

fn default() -> Self

Returns the “default value” for a type. Read more

impl PartialEq for PPM_WMI_PERF_STATES

fn eq(&self, other: &PPM_WMI_PERF_STATES) -> bool

This method tests for self and other values to be equal, and is used by ==.

1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for PPM_WMI_PERF_STATES

impl Eq for PPM_WMI_PERF_STATES

impl StructuralPartialEq for PPM_WMI_PERF_STATES

Auto Trait Implementations§

impl Freeze for PPM_WMI_PERF_STATES

impl RefUnwindSafe for PPM_WMI_PERF_STATES

impl Send for PPM_WMI_PERF_STATES

impl Sync for PPM_WMI_PERF_STATES

impl Unpin for PPM_WMI_PERF_STATES

impl UnwindSafe for PPM_WMI_PERF_STATES

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> CloneToUninit for T
where T: Clone,

default unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dst. Read more

impl<T> CloneToUninit for T
where T: Copy,

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dst. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T, U> Into<U> for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T, U> Param<T, CopyType> for U
where T: TypeKind<TypeKind = CopyType> + Clone, U: TypeKind<TypeKind = CopyType> + Clone + CanInto<T>,

unsafe fn param(self) -> ParamValue<T>

impl<T> ToOwned for T
where T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T, U> TryFrom<U> for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.