Table "Work Center"
Properties
| Name | Value |
|---|---|
| Caption | Work Center |
| DataCaptionFields | 1,3 |
| DrillDownPageID | Page Microsoft.Manufacturing.WorkCenter."Work Center List" |
| LookupPageID | Page Microsoft.Manufacturing.WorkCenter."Work Center List" |
| Permissions | TableData "Prod. Order Capacity Need" = rm |
| DataClassification | CustomerContent |
Fields
| Name | Type | Description |
|---|---|---|
| "No." | Code[20] | Specifies the number of the involved entry or record, according to the specified number series. |
| Name | Text[100] | Specifies the name of the work center. |
| "Search Name" | Code[100] | Specifies an alternate name that you can use to search for the record in question when you cannot remember the value in the Name field. |
| "Name 2" | Text[50] | |
| Address | Text[100] | |
| "Address 2" | Text[50] | |
| City | Text[30] | |
| "Post Code" | Code[20] | |
| "Alternate Work Center" | Code[20] | Specifies an alternate work center. |
| "Work Center Group Code" | Code[10] | Specifies the work center group, if the work center or underlying machine center is assigned to a work center group. |
| "Global Dimension 1 Code" | Code[20] | Specifies the code for the global dimension that is linked to the record or entry for analysis purposes. Two global dimensions, typically for the company's most important activities, are available on all cards, documents, reports, and lists. |
| "Global Dimension 2 Code" | Code[20] | Specifies the code for the global dimension that is linked to the record or entry for analysis purposes. Two global dimensions, typically for the company's most important activities, are available on all cards, documents, reports, and lists. |
| "Subcontractor No." | Code[20] | Specifies the number of a subcontractor who supplies this work center. |
| "Direct Unit Cost" | Decimal | Specifies the cost of one unit of the selected item or resource. |
| "Indirect Cost %" | Decimal | Specifies the percentage of the center's cost that includes indirect costs, such as machine maintenance. |
| "Unit Cost" | Decimal | Specifies the cost of one unit of the item or resource on the line. |
| "Queue Time" | Decimal | Specifies the queue time of the work center. |
| "Queue Time Unit of Meas. Code" | Code[10] | Specifies the queue time unit of measure code. |
| "Last Date Modified" | Date | Specifies when the work center card was last modified. |
| Comment | Boolean | |
| "Unit of Measure Code" | Code[10] | Specifies how each unit of the item or resource is measured, such as in pieces or hours. By default, the value in the Base Unit of Measure field on the item or resource card is inserted. |
| Capacity | Decimal | Specifies the amount of work that can be done in a specified time period. The capacity of a work center indicates how many machines or persons are working at the same time. If you enter 2, for example, the work center will take half of the time compared to a work center with the capacity of 1. |
| Efficiency | Decimal | Specifies the efficiency factor as a percentage of the work center. |
| "Maximum Efficiency" | Decimal | Specifies the maximum efficiency factor of the work center. |
| "Minimum Efficiency" | Decimal | Specifies the minimum efficiency factor of the work center. |
| "Calendar Rounding Precision" | Decimal | Specifies how calendar entries are rounded, such as whether minutes are rounded to hours. |
| "Simulation Type" | Option | Specifies the simulation type for the work center. |
| "Shop Calendar Code" | Code[10] | Specifies the shop calendar code that the planning of this work center refers to. |
| Blocked | Boolean | Specifies whether the work center is blocked from being posted in transactions, for example, if the machine center is out of order. |
| "Date Filter" | Date | |
| "Work Shift Filter" | Code[10] | |
| "Capacity (Total)" | Decimal | |
| "Capacity (Effective)" | Decimal | |
| "Prod. Order Need (Qty.)" | Decimal | |
| "Prod. Order Need Amount" | Decimal | |
| "Prod. Order Status Filter" | Enum Microsoft.Manufacturing.Document."Production Order Status" | |
| "Unit Cost Calculation" | Enum Microsoft.Foundation.Enums."Unit Cost Calculation Type" | Specifies the unit cost calculation that is to be made. |
| "Specific Unit Cost" | Boolean | Specifies where to define the unit costs. If you place a check mark in this field, you can define the unit costs on the routing line. This allows you to have individual costs on every routing line. This is useful for subcontracting operations with varying rates. |
| "Consolidated Calendar" | Boolean | Specifies whether the consolidated calendar is used. |
| "Flushing Method" | Enum Microsoft.Manufacturing.Setup."Flushing Method Routing" | Specifies the method to use to calculate and handle output at the work center. Manual: Output must be posted manually by using the output journal. Forward: Output is automatically calculated and posted when you change the status of a simulated, planned (or firm planned) production order to Released. You can still post output manually from the output journal. Backward: Output is automatically calculated and posted when you change the status of a released production order to Finished or when the last operation is finished. You can still post output manually from the output journal. The setting you make in this field is copied to the Flushing Method field on the production order routing line according to the machine/work center of the master routing, but you can change the field for an individual production order to allow a different output (or consumption) posting of that order. |
| "No. Series" | Code[20] | |
| "Overhead Rate" | Decimal | Specifies the overhead rate of this work center. |
| "Gen. Prod. Posting Group" | Code[20] | Specifies the item's product type to link transactions made for this item with the appropriate general ledger account according to the general posting setup. |
| County | Text[30] | |
| "Country/Region Code" | Code[10] | |
| "Location Code" | Code[10] | Specifies the location for which the bin codes on this work center apply. The bin codes are used on production order routing lines and components only when the production order's location matches this value. |
| "Open Shop Floor Bin Code" | Code[20] | Specifies the default bin for production order components with manual, forward, or backward flushing method. Copied to the production order routing line when the location code matches, then used as the component's bin code based on the flushing method. |
| "To-Production Bin Code" | Code[20] | Specifies the default bin for production order components with pick-based flushing methods (Pick + Forward, Pick + Backward, Pick + Manual). Copied to the production order routing line when the location code matches, then used as the component's bin code based on the flushing method. |
| "From-Production Bin Code" | Code[20] | Specifies the default bin for finished output. Copied to the production order routing line when the location code matches. At the last routing operation, this bin code flows to the production order line's bin code. |
| "Calendar Entries Avail. Until" | Date | Specifies the last date for which work center calendar entries have been calculated. If this date is in the past, run the Calculate Work Center Calendar report to extend the calendar. |
| SystemId | Guid | |
| SystemCreatedAt | DateTime | |
| SystemCreatedBy | Guid | |
| SystemModifiedAt | DateTime | |
| SystemModifiedBy | Guid | |
| SystemCreatedByUserName | Text[50] | |
| SystemCreatedByFullName | Text[80] | |
| SystemModifiedByUserName | Text[50] | |
| SystemModifiedByFullName | Text[80] | |
| SystemRowVersion | BigInteger |
Methods
AssistEdit
procedure AssistEdit(OldWorkCenter: Record "Work Center"): BooleanParameters
| Name | Type | Description |
|---|---|---|
| OldWorkCenter | Table Microsoft.Manufacturing.WorkCenter."Work Center" |
Returns
| Type | Description |
|---|---|
| Boolean |
ValidateShortcutDimCode
procedure ValidateShortcutDimCode(FieldNumber: Integer; var ShortcutDimCode: Code[20])Parameters
| Name | Type | Description |
|---|---|---|
| FieldNumber | Integer | |
| ShortcutDimCode | Code[20] |
GetBinCodeForFlushingMethod
procedure GetBinCodeForFlushingMethod(UseFlushingMethod: Boolean; FlushingMethod: Enum "Flushing Method"): Code[20]Parameters
| Name | Type | Description |
|---|---|---|
| UseFlushingMethod | Boolean | |
| FlushingMethod | Enum Microsoft.Manufacturing.Setup."Flushing Method" |
Returns
| Type | Description |
|---|---|
| Code[20] |
CheckBinCode
procedure CheckBinCode(LocationCode: Code[10]; BinCode: Code[20]; BinCaption: Text; WorkCenterNo: Code[20])Parameters
| Name | Type | Description |
|---|---|---|
| LocationCode | Code[10] | |
| BinCode | Code[20] | |
| BinCaption | Text | |
| WorkCenterNo | Code[20] |
Events
OnAfterGetBinCodeForFlushingMethod
[IntegrationEvent(False,False)]
local procedure OnAfterGetBinCodeForFlushingMethod(WorkCenter: Record "Work Center"; FlushingMethod: Enum "Flushing Method"; var Result: Code[20])Parameters
| Name | Type | Description |
|---|---|---|
| WorkCenter | Table Microsoft.Manufacturing.WorkCenter."Work Center" | |
| FlushingMethod | Enum Microsoft.Manufacturing.Setup."Flushing Method" | |
| Result | Code[20] |
OnAfterValidateShortcutDimCode
[IntegrationEvent(False,False)]
local procedure OnAfterValidateShortcutDimCode(var WorkCenter: Record "Work Center"; var xWorkCenter: Record "Work Center"; FieldNumber: Integer; var ShortcutDimCode: Code[20])Parameters
| Name | Type | Description |
|---|---|---|
| WorkCenter | Table Microsoft.Manufacturing.WorkCenter."Work Center" | |
| xWorkCenter | Table Microsoft.Manufacturing.WorkCenter."Work Center" | |
| FieldNumber | Integer | |
| ShortcutDimCode | Code[20] |
OnBeforeAssistEdit
[IntegrationEvent(False,False)]
local procedure OnBeforeAssistEdit(var WorkCenter: Record "Work Center"; OldWorkCenter: Record "Work Center"; var IsHandled: Boolean)Parameters
| Name | Type | Description |
|---|---|---|
| WorkCenter | Table Microsoft.Manufacturing.WorkCenter."Work Center" | |
| OldWorkCenter | Table Microsoft.Manufacturing.WorkCenter."Work Center" | |
| IsHandled | Boolean |
OnBeforeValidateShortcutDimCode
[IntegrationEvent(False,False)]
local procedure OnBeforeValidateShortcutDimCode(var WorkCenter: Record "Work Center"; var xWorkCenter: Record "Work Center"; FieldNumber: Integer; var ShortcutDimCode: Code[20])Parameters
| Name | Type | Description |
|---|---|---|
| WorkCenter | Table Microsoft.Manufacturing.WorkCenter."Work Center" | |
| xWorkCenter | Table Microsoft.Manufacturing.WorkCenter."Work Center" | |
| FieldNumber | Integer | |
| ShortcutDimCode | Code[20] |
OnValidateLocationCodeOnBeforeCheckBinMandatory
[IntegrationEvent(False,False)]
local procedure OnValidateLocationCodeOnBeforeCheckBinMandatory(var WorkCenter: Record "Work Center"; var Location: Record Location; var SkipErrorIfLocationIsNotBinMandatory: Boolean)Parameters
| Name | Type | Description |
|---|---|---|
| WorkCenter | Table Microsoft.Manufacturing.WorkCenter."Work Center" | |
| Location | Table Microsoft.Inventory.Location.Location | |
| SkipErrorIfLocationIsNotBinMandatory | Boolean |
OnValidateWorkCenterGroupCodeBeforeModify
[IntegrationEvent(False,False)]
local procedure OnValidateWorkCenterGroupCodeBeforeModify(var WorkCenter: Record "Work Center"; var xWorkCenter: Record "Work Center")Parameters
| Name | Type | Description |
|---|---|---|
| WorkCenter | Table Microsoft.Manufacturing.WorkCenter."Work Center" | |
| xWorkCenter | Table Microsoft.Manufacturing.WorkCenter."Work Center" |
OnBeforeValidateCity
[IntegrationEvent(False,False)]
local procedure OnBeforeValidateCity(var WorkCenter: Record "Work Center"; var PostCode: Record "Post Code"; CurrentFieldNo: Integer; var IsHandled: Boolean)Parameters
| Name | Type | Description |
|---|---|---|
| WorkCenter | Table Microsoft.Manufacturing.WorkCenter."Work Center" | |
| PostCode | Table Microsoft.Foundation.Address."Post Code" | |
| CurrentFieldNo | Integer | |
| IsHandled | Boolean |
OnBeforeValidatePostCode
[IntegrationEvent(False,False)]
local procedure OnBeforeValidatePostCode(var WorkCenter: Record "Work Center"; var PostCode: Record "Post Code"; CurrentFieldNo: Integer; var IsHandled: Boolean)Parameters
| Name | Type | Description |
|---|---|---|
| WorkCenter | Table Microsoft.Manufacturing.WorkCenter."Work Center" | |
| PostCode | Table Microsoft.Foundation.Address."Post Code" | |
| CurrentFieldNo | Integer | |
| IsHandled | Boolean |