Struct windows::Win32::Graphics::Direct2D::ID2D1RoundedRectangleGeometry

pub struct ID2D1RoundedRectangleGeometry(/* private fields */);

Implementations

impl ID2D1RoundedRectangleGeometry

pub unsafe fn GetRoundedRect(&self, roundedrect: *mut D2D1_ROUNDED_RECT)

Methods from Deref<Target = ID2D1Geometry>

pub unsafe fn GetBounds( &self, worldtransform: Option<*const Matrix3x2>, ) -> Result<D2D_RECT_F>

pub unsafe fn GetWidenedBounds<P0>( &self, strokewidth: f32, strokestyle: P0, worldtransform: Option<*const Matrix3x2>, flatteningtolerance: f32, ) -> Result<D2D_RECT_F>

where P0: Param<ID2D1StrokeStyle>,

pub unsafe fn StrokeContainsPoint<P0>( &self, point: D2D_POINT_2F, strokewidth: f32, strokestyle: P0, worldtransform: Option<*const Matrix3x2>, flatteningtolerance: f32, ) -> Result<BOOL>

where P0: Param<ID2D1StrokeStyle>,

pub unsafe fn FillContainsPoint( &self, point: D2D_POINT_2F, worldtransform: Option<*const Matrix3x2>, flatteningtolerance: f32, ) -> Result<BOOL>

pub unsafe fn CompareWithGeometry<P0>( &self, inputgeometry: P0, inputgeometrytransform: Option<*const Matrix3x2>, flatteningtolerance: f32, ) -> Result<D2D1_GEOMETRY_RELATION>

where P0: Param<ID2D1Geometry>,

pub unsafe fn Simplify<P0>( &self, simplificationoption: D2D1_GEOMETRY_SIMPLIFICATION_OPTION, worldtransform: Option<*const Matrix3x2>, flatteningtolerance: f32, geometrysink: P0, ) -> Result<()>

where P0: Param<ID2D1SimplifiedGeometrySink>,

pub unsafe fn Tessellate<P0>( &self, worldtransform: Option<*const Matrix3x2>, flatteningtolerance: f32, tessellationsink: P0, ) -> Result<()>

where P0: Param<ID2D1TessellationSink>,

pub unsafe fn CombineWithGeometry<P0, P1>( &self, inputgeometry: P0, combinemode: D2D1_COMBINE_MODE, inputgeometrytransform: Option<*const Matrix3x2>, flatteningtolerance: f32, geometrysink: P1, ) -> Result<()>

where P0: Param<ID2D1Geometry>, P1: Param<ID2D1SimplifiedGeometrySink>,

pub unsafe fn Outline<P0>( &self, worldtransform: Option<*const Matrix3x2>, flatteningtolerance: f32, geometrysink: P0, ) -> Result<()>

where P0: Param<ID2D1SimplifiedGeometrySink>,

pub unsafe fn ComputeArea( &self, worldtransform: Option<*const Matrix3x2>, flatteningtolerance: f32, ) -> Result<f32>

pub unsafe fn ComputeLength( &self, worldtransform: Option<*const Matrix3x2>, flatteningtolerance: f32, ) -> Result<f32>

pub unsafe fn ComputePointAtLength( &self, length: f32, worldtransform: Option<*const Matrix3x2>, flatteningtolerance: f32, point: Option<*mut D2D_POINT_2F>, unittangentvector: Option<*mut D2D_POINT_2F>, ) -> Result<()>

pub unsafe fn Widen<P0, P1>( &self, strokewidth: f32, strokestyle: P0, worldtransform: Option<*const Matrix3x2>, flatteningtolerance: f32, geometrysink: P1, ) -> Result<()>

where P0: Param<ID2D1StrokeStyle>, P1: Param<ID2D1SimplifiedGeometrySink>,

Methods from Deref<Target = ID2D1Resource>

pub unsafe fn GetFactory(&self) -> Result<ID2D1Factory>

Trait Implementations

impl CanInto<ID2D1Geometry> for ID2D1RoundedRectangleGeometry

const QUERY: bool = false

impl CanInto<ID2D1Resource> for ID2D1RoundedRectangleGeometry

const QUERY: bool = false

impl CanInto<IUnknown> for ID2D1RoundedRectangleGeometry

const QUERY: bool = false

impl Clone for ID2D1RoundedRectangleGeometry

fn clone(&self) -> ID2D1RoundedRectangleGeometry

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ID2D1RoundedRectangleGeometry

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Deref for ID2D1RoundedRectangleGeometry

type Target = ID2D1Geometry

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl From<&ID2D1RoundedRectangleGeometry> for &ID2D1Geometry

fn from(value: &ID2D1RoundedRectangleGeometry) -> Self

Converts to this type from the input type.

impl From<&ID2D1RoundedRectangleGeometry> for &ID2D1Resource

fn from(value: &ID2D1RoundedRectangleGeometry) -> Self

Converts to this type from the input type.

impl From<&ID2D1RoundedRectangleGeometry> for &IUnknown

fn from(value: &ID2D1RoundedRectangleGeometry) -> Self

Converts to this type from the input type.

impl From<ID2D1RoundedRectangleGeometry> for ID2D1Geometry

fn from(value: ID2D1RoundedRectangleGeometry) -> Self

Converts to this type from the input type.

impl From<ID2D1RoundedRectangleGeometry> for ID2D1Resource

fn from(value: ID2D1RoundedRectangleGeometry) -> Self

Converts to this type from the input type.

impl From<ID2D1RoundedRectangleGeometry> for IUnknown

fn from(value: ID2D1RoundedRectangleGeometry) -> Self

Converts to this type from the input type.

impl Interface for ID2D1RoundedRectangleGeometry

const IID: GUID = _

The GUID associated with the interface.

fn as_raw(&self) -> *mut c_void

Returns the raw COM interface pointer. The resulting pointer continues to be owned by the Interface implementation.

fn into_raw(self) -> *mut c_void

Returns the raw COM interface pointer and releases ownership. It the caller’s responsibility to release the COM interface pointer.

unsafe fn from_raw(raw: *mut c_void) -> Self

Creates an Interface by taking ownership of the raw COM interface pointer.

unsafe fn from_raw_borrowed(raw: &*mut c_void) -> Option<&Self>

Creates an Interface that is valid so long as the raw COM interface pointer is valid.

fn cast<T>(&self) -> Result<T, Error>

where T: Interface,

Attempts to cast the current interface to another interface using QueryInterface.

fn cast_to_any<T>(&self) -> Result<&(dyn Any + 'static), Error>

where T: ComObjectInner, <T as ComObjectInner>::Outer: Any + 'static + IUnknownImpl<Impl = T>,

This casts the given COM interface to [&dyn Any].

fn is_object<T>(&self) -> bool

where T: ComObjectInner, <T as ComObjectInner>::Outer: Any + 'static + IUnknownImpl<Impl = T>,

Returns true if the given COM interface refers to an implementation of T.

fn cast_object_ref<T>(&self) -> Result<&<T as ComObjectInner>::Outer, Error>

where T: ComObjectInner, <T as ComObjectInner>::Outer: Any + 'static + IUnknownImpl<Impl = T>,

This casts the given COM interface to [&dyn Any]. It returns a reference to the “outer” object, e.g. &MyApp_Impl, not the inner &MyApp object.

fn cast_object<T>(&self) -> Result<ComObject<T>, Error>

where T: ComObjectInner, <T as ComObjectInner>::Outer: Any + 'static + IUnknownImpl<Impl = T>,

This casts the given COM interface to [&dyn Any]. It returns a reference to the “outer” object, e.g. MyApp_Impl, not the inner MyApp object.

fn downgrade(&self) -> Result<Weak<Self>, Error>

Attempts to create a [Weak] reference to this object.

unsafe fn query(&self, iid: *const GUID, interface: *mut *mut c_void) -> HRESULT

Call QueryInterface on this interface

fn to_ref(&self) -> InterfaceRef<'_, Self>

Creates an InterfaceRef for this reference. The InterfaceRef tracks lifetimes statically, and eliminates the need for dynamic reference count adjustments (AddRef/Release).

impl PartialEq for ID2D1RoundedRectangleGeometry

fn eq(&self, other: &ID2D1RoundedRectangleGeometry) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Eq for ID2D1RoundedRectangleGeometry

impl Send for ID2D1RoundedRectangleGeometry

impl StructuralPartialEq for ID2D1RoundedRectangleGeometry

impl Sync for ID2D1RoundedRectangleGeometry